Piusi F0075510D OCIO 230V 50/60HZ Tank Level Indicator 1.0 (Pulse Out, Diesel) includes brass probe and 32′ hose. It is suitable for storage tanks of between 600mm – 4000mm in tank compartment height and once the gauge has been successfully calibrated it can read the contents of a storage tank in litres, millimetres or as a percentage according to the users requirements. It works by the weight of the fuid in the storage tank exerting pressure on the gauge’s flexible tubing that is inserted into the storage tank. This is then converted into a digital read out at the gauge. There are also high and low level alarms that can be set by the operator to warn of possible overfill or low fluid level situations. It can be used with oil when the Ocio Oil Kit is specified at the same time. It can also be used to measure the contents of up to a maximum of 12 storage tanks at any one time, helping to save on operator costs.

Features

• 230 volt, electronic, digital tank contents level indicator.
• For use on storage tanks 600mm – 4000mm inner tank height.
• Can read the tank contents in litres, millimetres or as a percentage of the tank.
• Uses the weight of the fluid to produce a reading.
• Low and high level alarms available.
• Can be used to measure diesel, gas oil, red diesel, water and windscreen fluid.
• Can also be used with oil when the optional Ocio Oil Kit is also specified.
• Adblue specific model available.
• 4 – 20 ma model also available for management systems.
• Accuracy +/-1%
• %, litre and mm readings.
• 1/2” M BSP balance chamber fitting.
• C/w two relays for connection to other equipment.
• IP54 Rated.
• Tank probe with 10 metres capillary.

Application

• Antifreeze
• Diesel
• Food
• Oil
• Water
• Windscreen